SKIL 15 AMP MITER SAW • The 10” dual bevel sliding miter saw is powered by a 15-Amp motor that drives 4,800 RPM, delivering extended power and durability. This miter saw features a horizontal grip handle with a center located safety trigger for left- or right-handed use. The 9 detents on the stainless-steel miter plate and 11 miter locations allows for 50-degree cuts left or right, with 11 positive stop positions at commonly used angles. The tool comes equipped with a cam miter lock knob for repeatable accuracy, durability, and easy adjustments, while the tall sliding fences support 4-1/2” base molding vertically, and 6-1/4” crown molding vertically nested. The LED Shadow Line provides high precision cuts with greater accuracy than traditional lasers, while the lightweight design and built-in carrying handle provide convenience and portability. The quick work clamp quickly secures materials for safer cutting. POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts DUAL BEVEL: Perform cuts in four positive stop positions at 48 & 45 degrees left, 0, and 45 degrees right LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers 2x12 CUTTING CAPACITY: Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees CUTS AT COMMON ANGLES - Cuts up to 50 degrees left and right with 11 positive stops at most used angles SLIDE RAIL SYSTEM - Linear bearings allow for smooth and accurate operation to cut HORIZONTAL GRIP HANDLE: A center located safety trigger allows for left or right-handed use

Genesis 15-Amp 10-Inch Sliding Compound Miter Saw, GMSDR1015LC • The Genesis GMSDR1015LC 15-Amp 10-In. Sliding Compound Miter Saw is a powerful, heavy-duty machine with exceptional crosscutting capacity for all your repetitive wood-cutting needs. Straight crosscuts up to 12 in., miter cuts, bevel cuts, and compound cuts are a breeze, whether you are cutting flooring, siding, crown or base molding or you just need to cut dimensional lumber down to size. A heavy-duty 15-amp motor drives the blade at 4,800 RPM for fast, smooth cutting. This saw has improved components, with increased stability in legs and tool platform, with easily adjustable knobs. A laser light cutting guide allows for quicker setup and improved accuracy. And your Genesis 10 in. sliding compound miter saw comes loaded with a 60T carbide blade installed, hold-down clamp, dust bag, 2 extension wings, rear support foot bar, blade wrench, and 2 AAA batteries for the laser. 15-amp motor Sliding rail system for crosscutting stock up to 12 in. wide; compound cutting for crown molding, shadow boxes, picture frames, etc. Laser light cutting guide for quicker alignment and improved accuracy Makes precision miter cuts up to 45º left and right Makes bevel cuts up to 45° left No-load speed: 4,800 RPM Blade size: 10 in. Arbor size: 5/8 in. Die-cast aluminum base for portability Spindle lock for quick blade changes Electric brake stops blade in seconds Max cutting capacity at 0° x 90° = H 3 in. x 12 in.; at 0° x 45°: H 1-5/8 in. x 12 in. Max cutting capacity at 45° x 90° = H 3 in. x 8-1/4 in.; at 45° x 45°: H 1-5/8 in. x 8-1/4 in. Weight: 40 lbs. Includes installed 60T carbide blade, hold-down clamp, dust bag, 2 extension wings, rear support foot bar, blade wrench, and 2 AAA batteries for laser

HART 10-inch 14-Amp Compound Miter Saw • For all your cutting needs, look to this 10-inch Compound Miter Saw. Its powerful 14 AMP motor delivers up to 5,500 RPM for cutting a variety of applications with ease. The positive miter stops cover all common angles (0, 15, 22.5, 31.6 and 45) and the built-in electric brake stops the blade in seconds for added safety. The LED cut line indicator enhances visibility and accuracy of cuts while the spindle lock provides easy single wrench blade changes. Includes (1) 10-inch compound corded miter saw,24T carbide tipped saw blade, a blade wrench, a dust bag and a work clamp. Key Features Powerful 14 AMP motor for cutting a variety of applications with ease LED cut line indicator enhances visibility and accuracy of cuts Miter stops located at the most common angles (0°, 15°, 22.5°, 31.6°, and 45°) on left and right side for quick cut settings Electric brake quickly stops the blade to reduce risk Spindle lock for fast and easy blade change Cast and machined miter scale for enhanced accuracy Included 24T carbide tipped bladed Includes: HART 10" Compound Miter Saw, 24T Carbide Tipped Blade, Blade Wrench, Dust Bag, Work Clamp and Operator's Manual Specs: Motor: 120V, 60 Hz 14 Amps, Motor Speed (RPM): 5,500/min (No Load Speed), Dust Port: 1 1/4", Blade Arbor: 5/8", Blade Diameter: 10", Cutting Capacities: Baseboard Against Fence 3 1/2", Crown Molding Laying Flat 4 5/8" (Bevel 33.9° x Miter 31.6°) 90 ° Miter Cut 2" x 6" or 4" x 4" 45° Miter Cut 2" x 4" 45° Bevel Cut 2" x 6"

12 in. Double Bevel Sliding Compound Miter Saw • The 12 in. Double Bevel Sliding Compound Miter Saw has a 15 Amp motor and integrated XPS crosscut positioning system for adjustment-free, accurate cut line indication. Tall sliding fences support 7-1/2 in. of nested crown and 6-3/4 in. of base molding vertically. Exclusive Back Fence Design cuts up to 2x14 dimensional lumber at 90 increased miter capacity of 60 (R) and 50 (L) features durable stainless-steel miter detent plate with cam lock for repeatable accuracy with easy adjustments.

Evolution Power Tools 10-Inch Multi-material Compound Sliding Miter Saw, R255SMS+ • With the R255SMS+ Sliding Compound Miter Saw, you'll get the job done right the first time and fast. This quality miter saw has been uniquely designed and engineered by Evolution's product designers to accurately and reliably perform all your everyday wood cutting tasks PLUS a whole lot more. The powerful motor and optimized hi-torque gearbox work in tandem with the premium carbide-tipped blade enabling you to effortlessly cut through not just wood but multi-materials including laminates, composite decking, mild steel, aluminum, copper, plastics and even wood with embedded nails or screws. Cleaner & safer working enviroment with dust collection bag and dust port addaptor for use with vacuum extraction. Nothing touches the all-around capability and value of the Evolution R255SMS+ Sliding Compound Miter Saw. With our unique multi-material cutting technology you can perform all types of cuts on all types of materials you may encounter in a project, all without stopping to change blades. Backed by Evolution's 3-Year Manufacturer's Warranty and outstanding customer service. Multi-Material cutting technology with on blade. Clean, smooth, square, consistent cutting every time, in every material Steel cuts are instantly workable ? no burrs, no heat, virtually no sparks ? faster and safer Perform accurate cross cuts, miter cuts, bevel cuts and compound cuts with adjustable precision settings Accurately cut to within +/- 0.5? with 0° - 45° bevel tilt and 50? - 50? miter angles with quick click positive miter stops at 0?, 15?, 22.5?, 30? and 45? both left & right Powerful 15A hi-torque, optimized gearbox and blade system increases motor and blade life to cut through every material with ease 10 in. carbide-tipped premium steel blade included Adjustable depth of cut Built-in laser guide provides precise cutline guidance Three piece quick-release hold down clamp 10-foot durable rubber-coated cable with built-in cable tidy Rear dust extraction port & dust bag included Ergonomic handle and horizontal trigger designed for both left-handed and right-handed users Comfortable grip helps combat repetitive strain Wide base and rubber feet reduces vibration and increases precision Quick and easy blade change with included hex key Compatible with Evolution's Miter Saw Stand, giving you full control to cut accurate repeated lengths on wide and long materials with ease The Evolution 10 in. Diamond Blade can be fitted to cut an additional range of materials including ceramic tiles, brick and ornamental stone (sold separately)

Genesis 10-Inch 15-Amp Compound Miter Saw with Laser, GMS1015LC • Get the job done more efficiently and quickly with the Genesis 10" Compound Miter Saw with Laser. It makes precise cuts at different angles, up to 45 degrees. This sliding compound miter saw is suitable for crown molding, picture frames, baseboard trim and more. There is an included hold-down clamp and dust bag for less mess to clean up. The Genesis miter saw features an electric brake that brings the blade to a stop very fast for your safety. Genesis 10" Compound Miter Saw (92552E) with Laser: Make precision miter cuts up to 45 degrees left and right, with 9 position stops at commonly used angles Sliding compound miter saw helps you make bevel cuts up to 45 degrees left Use compound cutting for crown molding, shadow boxes, picture frames and more Laser-light cutting guide for quicker alignment and improved accuracy Genesis miter saw has a die-cast aluminum base for portability Electric brake stops the blade in seconds Spindle lock for quick blade changes 120V/60Hz 15A 4,600 rpm Arbor size: 5/8" CSA certified Includes: 60T carbide tipped blade installed, hold-down clamp, dust bag, 2 extension wings, two AAA batteries for laser and blade wrenches

Hitachi C10FSHQSM 10" Dual Slide Miter • The Metabo HPT 10" Sliding dual compound Miter saw with laser marker offers the ultimate in Form and function For trim carpenters, framers and woodworkers. The positive stops on the miter and bevel scales make for easy to read measurements an Quick settings. With a 45 degree dual bevel angle range users can quickly flip the saw blade and leave the material in place. The linear ball bearing slide system and white on black Miter scale provide superior accuracy and visibility. Electronic speed control Keeps RPM's Constant and unintended cuts are avoided with the Electric brake feature Dual Slide Miter 12 AMP belt driven motor with soft start and overload protection * Adjustable laser guide for precise cutting Soft Start feature reduces noise and rec during start-up Electronic speed control keeps RPMs constant as load varies Linear ball bearing slide system for precision and durability One Year Manufacturer Warranty 10"

HART 7-1/4-Inch 9-Amp Compound Miter Saw, HTMS01 • Compact and lightweight, The HART 7-1/4-inch Compound Miter Saw is a great addition to your collection. It has up to 2-inchx4-inch cut capacity with 4-1/4-inch max crosscut. It features an adjustable bevel from 0° - 45° with adjustable positive stops at the most common angles (0°, 15°, 22.5°, 31.6°, and 45°) left and right for quick cut settings and a trigger lockout for increased safety. The partial sliding fence provides better material support during application. Includes (1) 7-1/4-inch compound corded miter saw,24T carbide tipped saw blade, a blade wrench, a dust bag and a work clamp. Key Features Up to 2" x 4" cut capacity with 4 1/4" max cross cut Miter stops located at the most common angles (0°, 15°, 22.5°, 31.6°, and 45°) on left and right side for quick cut settings Adjustable bevel from ° 0- 45° with adjustable positive stops at 0° and 45° Trigger lockout for increased safety Partial sliding fence for better material support Lightweight and compact design Included 24T carbide tipped bladed Includes: 7 1/4" Compound Miter Saw, 24T Carbide Tipped Blade, Blade Wrench, Dust Bag, Work Clamp and Operator's Manual Specs: Motor: 120V AC, 9 amps, Motor Speed (RPM): 5,100/min (No Load Speed), Dust Port: 1 1/4", Blade Arbor: 5/8", Cutting Capacities: Baseboard Laying Flat 4 1/4", 90° miter cut 1 1/2" x 4 1/4", 45° bevel cut 1 1/2" x 3 1/2", 45° miter cut 1 1/2" x 3"

SKIL 12-Inch Quick Mount Compound Miter Saw with Laser, 3821-01 • This 12 in. compound miter saw, model 3821, includes a laser, extension rails and a powerful motor that make it an ideal miter saw for any intermediate DIYer or woodworker. Transportable - integrated carrying handles for easy transport. Dust bag helps keep work area clean. Nine positive stops for setting common miter angles. Laser Cutline Guide for fast and accurate cuts 9 Positive stops for setting common miter angles Powerful 15 Amp Motor with 4,500 RPM Table extension with left/right extension rails for long, large work pieces

Metabo HPT 10 in. Corded Compound Miter Saw 120 volt 12 amps 3800 rpm • Metabo HPT 10 in. Corded Compound Miter Saw 120 volt 12 amps 3800 rpm Positive stops on miter and bevel scale, for easy to read measurements and quick settings. Soft start function reduced noise and recoil during start-up. Electric Brake stops blade within seconds. Linear ball bearing slide system for superior accuracy and ease of use. Electronic speed control maintains RPM while cutting, and improves control.

Metabo HPT 15 amps 10 in. Corded Compound Miter Saw Tool Only • The Hitachi C10FCGM 10" Compound Miter Saw is lightweight for easier transport. The 15 Amp motor generates a no-load speed of up to 5,000 RPM for making crosscuts and miter cuts with ease. This saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts. It is designed for woodworkers who demand precision, reliability and versatility on the job. Features Large table for better material support with vice clamping system to secure work piece Thumb actuated positive stops for quick miter adjustments Horizontal handle for a secure hold Carbon brush access allows user to replace brush as needed to greatly prolong the life of the tool 0-52 degree miter angle range to the right & left for increased flexibility 0-45 degree bevel range to the left to provide clean and accurate bevel cutsSpecifications Size: 10 in. - SKU: JNSN98188 Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT 15 Amp motor delivers high power for the toughest cutting jobs 0-52 degree miter angle range to the right & left for increased flexibility

15 Amp 12 in. Electric Double-Bevel Compound Miter Saw

WEN 15-Amp 10-Inch Dual Bevel Sliding Compound Miter Saw with LED Cutline • Remember when your miter saw could do it all? Create cuts at any angle with the WEN 10 in. Dual Bevel Sliding Compound Miter Saw. Our powerful 15-amp motor slices through even the hardest of woods, providing 5000 blade rotations per minute. This versatile saw bevels up to 45 degrees in either direction and miters up to 49 degrees in either direction, with a front bevel control for fast and easy adjustment. Cut boards up to 12 inches wide and 3.75 inches thick or make compound cuts (45° bevel and 45° miter) in boards up to 8.5 inches wide and 2.6 inches thick. The saw features 9 miter stops: two at 15 degrees, two at 22.5 degrees, two at 31.6 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, the miter lock still allows the saw to lock at any angle between those stops. The onboard LED cutline guide casts a shadow against the blade to illuminate your line of cut for maximum accuracy while the dust collection port allows for connection to either the included dust bag or your dust collection device of choice. This spacious saw also features a 5.5-inch crown molding nested capacity and a 3.5-inch base board vertical capacity. This package includes a 40-tooth carbide-tipped blade with a 5/8-inch arbor (model BL1040), two adjustable support fences, one quick-clamp assembly, a dust port, a dust bag, and a carrying handle. And, because it’s a WEN product, your miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN. Powerful 15-amp motor crosscuts boards up to 12 inches wide and 3.75 inches thick Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint Bevel up to 45 degrees or miter up to 49 degrees in either direction (featuring 9 miter stops) Onboard LED cutline guide illuminates your line of cut for maximum accuracy Includes a 40-tooth carbide-tipped blade with a 5/8-inch arbor (model BL1040), two adjustable support fences, one quick-clamp assembly, a dust port, a dust bag, a carrying handle, and a two-year warranty

The 10 in. Compound Miter Saw has a 15 Amp motor to deliver 5,000 rpm for extended power and durability. It features a stainless-steel miter detent plate and turn knob lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 4-1/2 in. of crown molding vertically nested. The lightweight design and built-in carry handle allow for great portability.

8-1/4 in. Compact Jobsite Table Saw • Maximized for accuracy and capacity, this 8-1/4 in. Table Saw includes on-board storage for the blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade-change wrenches, miter gauge, and push stick. The powerful 15 Amp, 5800 rpm motor allows users to complete a majority of applications. The rack & pinion fence allows for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods.

Genesis GTS10SC 15-Amp 10-In. Table Saw with Metal Stand • The Genesis GTS10SC 10-In. 15-Amp Table Saw is ideal for your next DIY project around the home or shop. It includes an extra-large 26 in. x 21-1/2-in. die-cast aluminum table and self-aligning rip fence that simultaneously locks at the front and rear of the table saw. The no-load speed of the blade is 4,800 RPM and you can perform bevel cuts from 0deg to 45deg . The GENESIS GTS10SC includes 40T carbide-tipped 10-in. blade, rip fence, miter gauge, aluminum guide, push stick, wrenches, and heavy-duty metal stand. 15-amp motor Accessory storage for push stick and miter gauge for convenient and easy organization and cleanup No-load speed: 4,800 RPM Bevel cuts from 0° to 45° Weight: 48 lbs. Blade size: 10 in. Max depth of cut at 90°: 3 in.; at 45°: 2-1/2 in. Includes 40T carbide-tipped 10-in. blade, rip fence, miter gauge, aluminum guide, push stick, wrenches, and heavy-duty metal stand Arbor size: 5/8 in. Tool-free installation of blade guard; reset button for overload protection Combination table saw and stand 26 in. L x 21-1/2-in. W die-cast aluminum table with included self-aligning rip fence that automatically locks front and rear Rips material up to 10 in. W

Hyper Tough 10 inch 15 Amp Table Saw, TS1001 • Powered by a 15Amp motor, the Hyper Tough Table Saw can generate up to 4800 RPM for powerful cutting and the 10 in. table provides portable support for ripping operations, which is lightweight and easy to use. With its 0-45 degree bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees. Backed by the 2-Year Limited Warranty of Hyper Tough, the 10-inch 15Amp Table Saw comes equipped with an anti-kickback pawl, a blade guard, a 10 in. tooth blade, n aluminum rip fence, a rip fence extension, a miter gauge, a push stick, two blade wrenches and an operator's manual. Hyper Tough 10-inch 15Amp Table Saw; Lightweight and Portable; Bevel Range 0-45 Degrees; 0-45 Degree Cutting Range; 15 Amps; AC Volts/Amps: 120V 60Hz. 15A; Arbor Size: 5/8 in.; Blade Diameter: 10” X 5/8” X 24T; Cutting Height: 0° Max: 3.15 in. (80mm)/45° Max: 2.5 in. (63.5mm); Cutting Width Capacity: Left: 11 in. (280mm)/Right: 8 in. (204mm); No Load Speed: 4800 RPM; Product Dimension (L x W x H): 22.5x24.6x18 inch; Product Weight: 32.8lbs; 2-Year Limited Warranty; Included: an anti-kickback pawl, a blade guard, a 10 in. tooth blade, n aluminum rip fence, a rip fence extension, a miter gauge, a push stick and two blade wrenches; Model#: TS1001;

WEN 11 Amp 8.25-inch Compact Benchtop Jobsite Table Saw • Remember when you had the power of a table saw whenever and wherever you needed it? The WEN 11-Amp 8.25-Inch Benchtop Table Saw provides a compact and portable solution for sawing straight, long cuts on larger workpieces. Our spacious table extends out for a rip-cut capacity of up to 25 inches, perfect for ripping 4x8 plywood or OSB sheets. The height adjustment wheel easily adjusts the height of the exposed blade anywhere from 0 to 2.75 inches. The angle of the blade can also be adjusted for bevel cuts up to 2 inches thick at 45 degrees. The tool-free blade guard can be easily installed or removed as needed, while the extension arm increases the 18.9-by-18.4-inch table all the way out to 18.9 by 36 inches in size. The compact housing measures in with a footprint of a mere 15.5 by 23 inches, and includes a side carrying handle for easy transportation and storage between uses. The WEN Benchtop Table Saw also includes an 8.25-inch TCT 24T blade with 5/8-inch arbor, an adjustable rip fence, an auxiliary fence for workpieces less than 1/10 of an inch thick, a miter gauge, a push stick, a dust port adapter, a riving knife to limit kickback, and onboard storage for easy organization. And because it’s a WEN product, your table saw also comes backed by a two-year warranty, a helpful customer phone line, and a stocked inventory of replacement parts. Remember when you had a saw that could really rip? Remember WEN. Features a rip capacity of up to 25 inches for taking on 4x8 plywood and OSB sheets Powerful 11-amp motor rotates the included 8.25-inch TCT 24T blade up to 4500 RPM Adjust both the height and angle of the blade to cut boards up to 2.75 inches thick at 90 degrees and 2 inches thick at 45 degrees Compact design combined with onboard carrying handle make for easy storage and transportation Includes an adjustable rip fence, auxiliary fence, miter gauge, push stick, dust port adapter, tool-free blade guard, riving knife, onboard storage, and a two-year warranty

WEN 15-Amp 2 HP 10-Inch Industrial Benchtop Jobsite Table Saw • Remember when you had the power of a table saw whenever and wherever you needed it? The WEN 15-Amp 10-Inch Benchtop and Jobsite Table Saw provides a compact, portable solution for making straight, long cuts on larger workpieces. Our spacious die-cast-aluminum table extends out for a rip-cut capacity of up to 28-3/4 inches to the right of the blade with a rack-and-pinion, cam-locking adjustment mechanism for precision woodworking. This makes for the perfect saw for ripping 4x8 plywood or OSB sheets. The height adjustment wheel easily adjusts the height of the exposed blade anywhere from 0 to 3-1/8 inches. The angle of the blade can also be adjusted for bevel cuts up to 2-1/4 inches thick at 45 degrees. The tool-free blade guard can be easily installed or removed as needed, while the extension arm and rear support increase the 26-1/4 by 22-inch table all the way out to 41-3/4 by 32-1/4 inches in size. The housing measures in with a footprint of 26-1/2 by 20 inches, and includes solid rubber feet to minimize vibration. These feet also double as side carrying handles for easy transportation and storage between uses. The WEN Benchtop Table Saw also includes a WEN BL1040 10-Inch 40T TCT blade with 5/8-inch arbor, an adjustable rip fence with narrow-rip attachment, a table extension rest, a miter gauge, a push stick, an onboard 2-1/2-inch dust port, a riving knife to limit kickback, a blade wrench, and onboard storage for easy organization. Compatible with the WEN TT1015-DADO dado throat plate and BL088D 8-Inch Dado Blade Set. And because it’s a WEN product, your table saw also comes backed by a two-year warranty, a helpful customer phone line, and a stocked inventory of replacement parts. Remember when you had a saw that could really rip? Remember WEN. Features a rip capacity of up to 28-3/4 inches for taking on 4x8 plywood and OSB sheets Powerful 15-amp 2 HP motor rotates the included 10-inch TCT 40T blade up to 4800 RPM Adjust both the height and angle of the blade to cut boards up to 3-1/8 inches thick at 90 degrees and 2-1/4 inches thick at 45 degrees Compact design combined with onboard carrying handle make for easy storage and transportation Includes an adjustable narrow-rip fence, table extension rest, miter gauge, push stick, 2-1/2-inch dust port, tool-free blade guard, riving knife, onboard storage, and a two-year warranty

SKIL 2.8 Amp 9 In. 2-Speed Benchtop Band Saw • For cutting irregular shapes and ripping lumber into thinner pieces, the SKIL 2.8 Amp 9-Inch 2-Speed Benchtop Band Saw is an essential piece for the woodshop. The band saw’s powerful 2.8 amp induction motor allows you to rip through a variety of wood materials while its precision ball bearing and lower blade guides ensure consistent tracking for accurate cutting performance. Rack and pinion table adjustments allow for quick angle adjustments and its two-speed drive system features tool-free belt tensioning. Other features of this SKIL saw include a dust port that accepts standard 2 ½-inch vacuum hoses to keep your work area dust-free and a miter gauge to guide the workpiece when making crosscuts. POWERFUL 2.8 AMP INDUCTION MOTOR—Rip through a variety of wood materials with the 2.8 amp induction motor 2-SPEED DRIVE SYSTEM—Allows tool-free belt tensioning QUICK BLADE TENSION SETTING—Set blade tension quickly and accurately for clean cuts PRECISION BALL BEARING AND LOWER BLADE GUIDES—Ensure consistent tracking for accurate cutting performance RACK AND PINION TABLE ADJUSTMENT—Makes quick angle adjustments DUST PORT—Accepts standard 2 ½-inch vacuum hoses, minimizing dust in work area MITER GAUGE—Guides the workpiece when making crosscuts STEEL BASE—Stabilizes band saw BLADE-TRACKING SIGHT WINDOW—Allows you to cut with greater accuracy

GENERAL INTERNATIONAL 12 inch 2/3 HP Wood Cutting Vertical Band Saw • GENERAL INTERNATIONAL 12"- 2/3HP Contractor grade Wood Cuttng Bandsaw is constructed from Sturdy steel. Sturdy welded steel frame & precision balanced internal working wheels with replaceable tires, means longer lasting and durability. Includes a easy-to-assemble, open-base sturdy steel stand. Includes precision easy-adjusting European style blade guide bearings. Two cutting speeds makes for excellent results in either hard or soft woods. A Miter gauge with aluminum crosscut fence is included as a bonus. Hinged doors and easily accessible blade tension knob, for fast blade changes and adjustments. Extra large designed 21-1/2" x 15-3/4" cast-iron table for stability and durability. The oversized paddle, safety lock-out on/off switch with removable key, prevents unauthorized use and easy to shut on and off. The bonus, multi-size dust port fits 4”, 3”, or 2” hose. Limited 2 year warranty. 2/3HP Contractor grade Wood Cuttng Bandsaw is constructed from Sturdy steel. Sturdy welded steel frame & precision balanced internal working wheels with replaceable tires, means longer lasting and durability. Includes a easy-to-assemble, open-base sturdy steel stand. Includes precision easy-adjusting European style blade guide bearings. Two cutting speeds makes for excellent results in either hard or soft woods. A Miter gauge with aluminum crosscut fence is included as a bonus. Hinged doors and easily accessible blade tension knob, for fast blade changes and adjustments. Extra large designed 21-1/2 in. x 15-3/4 in. cast-iron table for stability and durability. The oversized paddle, safety lock-out on/off switch with removable key, prevents unauthorized use and easy to shut on and off. The bonus, multi-size dust port fits 4 in., 3 in., or 2 in. hose.

WEN Aluminum Miter Saw Bevel Gauge and Corner Angle Finder for Woodworking • Remember when you could easily replicate the angles of your corners? The WEN Angle Finder allows you to easily copy angles onto your workpiece. Simply loosen the locking nut and slide the rounded end into your desired corner. The ruler will display the corner?s angle, allowing you to lock the bevel gauge in place for easy replication onto your workpiece. The laser-etched degree and ruler markings maximize accuracy during operation while the sturdy aluminum construction provides a reliable straight edge that won?t bend or warp. Remember when you had the perfect tool for the job? Remember WEN. Allows for easy replication of internal custom angles Manually measure angles anywhere from 10 to 170 degrees Perfect for wood, brick, tile, stone, laminate, crown molding, and more Laser-etched degree markings maximize accuracy without fading over time Sturdy aluminum alloy construction provides a durable long-lasting straight edge