6" Drill Press Clamp • Remember when you could hold your work piece tightly in place? The WEN Six-Inch Drill Press Clamp secures boards and materials to your drill press table, allowing for a clean and accurate cut every time. The one-inch throat has the capacity of holding boards up to 1-1/2 inches deep. With its adjustable tension and quick release design, the WEN 6-Inch Drill Press Clamp adds safety and precision to any drill press. And, because its a WEN product, your clamp comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure that you remember WEN. 6" Drill Press Clamp: Clamp boards up to 1-1/2" thick Featuring a 1" throat Tension adjustment knob changes the strength of the clamp’s grasp Fastens easily to drill press table slots Quick release lever makes for simple disengagement

WEN Products Light Duty JT33 Keyless Drill Press Chuck with 1/32 to 1/2-Inch Capacity • Remember when you had the perfect chuck. Secure your bits with the WEN 1/2-Inch Keyless Drill Chuck. This reliable carbon steel drill chuck operates with less than 0.008 inches of runout (0.2 mm) for maximum drilling accuracy. Our JT33 arbor taper fits perfectly onto any JT33 drill press, lathe, or mill and can be installed with the simple tap of a rubber mallet. The 3-jaw-chuck opens and closes without the use of any keys or tools. The chuck is compatible with any 1/32 to 1/2 inch diameter drill bit. Our universal design fits onto a wide variety of drill presses, including WEN drill press models 4208, 4210, 4210T and 4212. Operates with less than 0.008 inches of runout (0.2 mm) Holds drill bits anywhere from 1/32 to 1/2 inches in diameter Easily open and close the three chuck jaws without any tools or keys Universal design fits onto any drill press with a JT33 spindle Compatible with WEN models 4208, 4210, 4210T and 4212 drill presses

WEN 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop Drill Press • Remember when you could drill with maximum accuracy. Power through metal, wood, plastics, and more with the WEN 8-Inch 5-Speed Drill Press. Don’t let our compact design fool you. Between the five operating speeds, the two-inch spindle travel, and the sturdy construction, you’ll have way more precision than a standard handheld drill. Our 2.3-amp induction motor features ball bearings for smooth balanced performance even at high speed. Manually set your speed to either 740, 1100, 1530, 2100, or 3140 RPM by adjusting the belt position on the two spindles. The easy-to-read, locking depth stop allows for accurate and repeatable drilling operations. The table bevels 45° left and right for angled drilling. The base is designed with holes for mounting onto a bench or work stand. Clamps and vises are easily mounted to the slotted table, making work-holding safe and effective. And because its a WEN product, your drill press comes backed by a two-year warranty, a stocked inventory of replacement parts, and a helpful customer phone line. Remember when you could drill holes in almost anything. Remember WEN. Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel Includes a 1/2-inch keyed chuck and onboard key storage Operates at 5 different speeds: 740, 1100, 1530, 2100, or 3140 RPM 6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each direction Measures in at 23 inches tall with a 7 by 11-inch base

24-by-12-Inch Drill Press Table with an Adjustable Fence and Stop Block • Remember when you could drill into your big old workpieces? Take your drill press to the next level with the WEN Drill Press Table. The spacious 23-7/8-by-11-7/8-inch table creates additional support for larger workpieces. The sturdy 1-inch thick MDF body prevents warping and wobbling during operation. Onboard rulers maximize accuracy for precise and even cuts while the adjustable 23-5/8 in. x 2 in. fence and stop block allow you to perfectly line up any project. The removable insert allows users to drill completely through their workpiece without damaging the table. Our unique table design provides clearance for the drill press’ height adjustment crank, making for easy vertical adjustments of your table. Compatible with the entire line of WEN drill presses, including the WEN 8-Inch Drill Press (models 4206 and 4208), the WEN 10-Inch Drill Press (models 4210, 4210T & 4212), the WEN 12-Inch Drill Press (model 4214), the WEN 15-Inch Drill Press (model 4225), and the WEN 17-Inch Drill Press (model 4227). Although this drill press was designed with WEN in mind, its universal fit allows for installation on drill presses of all shapes and sizes. Simply tighten the included mounting clamps onto tables anywhere from 4 to 22 inches in width. This unit also comes with extra mounting clamps that double as hold down clamps to ensure your workpiece stays secure while drilling. And, because it’s a WEN product, your drill press table comes backed by a friendly customer help line and a two-year warranty, all to make sure you remember WEN. Expand your drill press workspace; compatible with the entire WEN Drill Press series Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches Unique design provides clearance for the drill press’ table height adjustment crank

WEN 5-Amp 10-Inch Variable Speed Cast Iron Benchtop Drill Press with Laser • Remember when power tools were actually powerful? The WEN 10-Inch Variable Speed Drill Press powers through metal, wood, plastic and more, with the ability to drill up to a 1/2-inch hole through heavy-duty, 1-inch-thick cast iron. The mechanical variable speed allows you to dial in the exact RPM (from 530 to 3100) for your project with the simple turn of a lever while the digital LED readout displays the current speed. The powerful induction motor features ball bearings for an extended life and balanced performance. The 1/2-inch chuck with JT33 spindle taper gives you versatility with a variety of bits, with on-board chuck key storage for easy organization. The 8 by 7.5-inch cast-iron worktable bevels 45° left and right for those tricky operations. The X-pattern laser shows your drill’s center points, saving on guesswork and sparing expensive materials. The 8 by 12.5-inch cast iron base features predrilled holes for easy mounting to the benchtop or work surface of your choice. And because it’s a WEN product, your drill press comes backed by a two-year warranty, a friendly customer support line, and a stocked inventory of replacement parts. Remember when you could drill with laser precision? Remember WEN. Features a 5-amp induction motor, a 10-inch swing, and a 2-inch spindle travel Digital speed readout displays current RPM of the machine for maximum precision Includes a laser, adjustable depth stop, beveling 8 by 7.5-inch work table, 1/2-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty Measures in at 13.2 by 19.3 by 33.9 inches in size with a weight of 57 pounds

Yost 1104 Drill Press Vise • The Yost Drill Press Vise Model #1104 with removable swivel base can be rotated and locked in any position. The vise can be removed from the swivel base and be used as a conventional drill press vise. The sides and bottom are machined flat and perpendicular to adjacent sides to allow the vise to be used one either side or on end. High strength grey iron castings are machined smooth for accurate movement with no lateral end play. The steel adjusting screw has a coarse-pitch thread for fast action. The jaws are hardened steel and replaceable. The stationary jaw is grooved vertically as well as horizontally for convenience in holding round pieces. Yost 1104 Drill Press Vise: The Yost Drill Press Vise Model #1104 with removable swivel base can be rotated and locked in any position The vise can be removed from the swivel base and be used as a conventional drill press vise The sides and bottom are machined flat and perpendicular to adjacent sides to allow the vise to be used 1 either side or on end High strength grey iron castings are machined smooth for accurate movement with no lateral end play The steel adjusting screw has a coarse-pitch thread for fast action The jaws are hardened steel and replaceable The stationary jaw is grooved vertically as well as horizontally for convenience in holding round pieces

WEN Products 4 in. Drill Press Vise • The WEN 4 in. Cast Iron Drill Press Vise clinches grip woods, metals, plastics and more, holding workpieces firmly in place for safe and accurate drilling. The heavy cast iron base along with the 4 onboard mounting slots provides stability to the vise during operation. The 4 in. jaws open up a total of 4 in. with a 1 in. throat depth to tightly grip boards and metals of a variety of shapes. Never worry about your workpieces budging again with the WEN 4 in. Cast Iron Drill Press Vise. Includes four onboard mounting slots to securely fasten the vise to a drill press table Universal design compatible with the majority of drill presses on the market (see images for base dimensions) Remember WEN.

WEN Products 3 in. Drill Press Vise • The WEN 3 in. Cast Iron Drill Press Vise clinches grip woods, metals, plastics and more, holding workpieces firmly in place for safe and accurate drilling. The heavy cast iron base along with the 4 onboard mounting slots provides stability to the vise during operation. The 3 in. jaws open up a total of 3-1/10 in. with a 1 in. throat depth to tightly grip boards and metals of a variety of shapes. Never worry about your workpieces budging again with the WEN 3 in. Cast Iron Drill Press Vise. Mounting slots to securely fasten the vise to a drill press table Universal design compatible with the majority of drill presses on the market (see images for base dimensions) Remember WEN.

Yost 6D-QR Heavy Duty Drill Press Vise, Quick Release • Yost 6D-QR Heavy Duty Drill Press Vise, Quick Release Made using 30,000 PSI Gray Iron Casting Quick Release Main Screw Jaw Width: 6" Jaw Opening: 6" Throat Depth: 2" Meets NSN # 3460-01-198-4469 Horizontally & Vertically Grooved Jaws (Moveable)

WEN 4.25-Inch Industrial Strength Benchtop and Drill Press Tilting Angle Vise • Remember when you could make fine-tune adjustments with the simple turn of a wheel? The WEN 4.25-Inch Tilting Vise provides 90 degrees of stable and reliable clamping action. Great for incremental drilling and precision work. With a locking cradle and positive work stops every 15 degrees (0, 15, 30, 45, 60, 75, and 90 degrees), this vise is the perfect companion for your benchtop, your drill press, your work table, and more. Made from heavy duty powder-coated cast iron, the WEN Tilting Vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 4.25-by-1.75-inch jaws open up to 4.25 inches wide. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With six 1/2-inch mounting brackets positioned around the outside edge of the vise?s base, the WEN Angled Vise is compatible with the majority of drill press tables on the market, including the WEN 4214 12-Inch Drill Press, the WEN 4225 15-Inch Drill Press, and the WEN 4227 17-Inch Drill Press. And because it?s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN. 4.25 by 1.75 inch jaws open up to 4.25 inches wide Constructed of industrial-strength powder-coated cast iron Features 7 positive tilting stops; one every 15 degrees from 0 to 90 Five 1/2-inch mounting brackets allow for compatibility with the majority of drill press tables on the market Compatible with the WEN 12-Inch, 15-Inch, and 17-Inch Drill Presses

WEN 3.25-Inch Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise • Remember when you could make fine-tune adjustments with the simple turn of a wheel? The WEN 3.25-Inch Cross Vise provides stable support for your workpieces. Perfect for incremental drilling and other precision work. Attach it to your bench top, your drill press, your work table and more. Made from heavy duty powder-coated cast iron, the WEN Cross Vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 3.25 by 1.25 jaws open up to 3.25 inches wide. Make minor adjustments along either axis with the onboard hand wheels. Each hand wheel features machined 0.1 mm increments, each full turn representing 3 mm of travel. The vise moves a full 5.8 inches (148 mm) along the x-axis and 6 inches along the y-axis (150 mm), making it the perfect companion for woodworkers and metalworkers alike. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally. With five 1/2-inch mounting brackets positioned around the outside edge of the vise’s base, the WEN Cross Vise is compatible with the majority of drill press tables on the market. And because it’s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN. WEN 3.25-Inch Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise: 3.25 by 1.25 inch jaws open up to 3.25 inches wide Constructed of industrial-strength powder-coated cast iron Hand wheels feature machine-marked 0.1 mm increments for maximum precision Jaws travel 5.8 inches left and right and 6 inches front and back Five 1/2-inch mounting brackets allow for compatibility with the majority of drill press tables on the market

WEN Products 3.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise • Remember when you could make fine-tune adjustments with the simple turn of a wheel. The WEN 3.25 in. Cross Vise provides stable support for your workpieces. Perfect for incremental drilling and other precision work. Attach it to your bench top, your drill press, your work table and more. Made from heavy duty powder-coated cast iron, the WEN Cross Vise grips tightly onto your workpieces, providing over 1900 lbs. of clamping force. The 3.25 by 1.25 jaws open up to 3.25 in. W. Make minor adjustments along either axis with the onboard hand wheels. Each hand wheel features machined 0.1 mm increments, each full turn representing 3 mm of travel. The vise moves a full 5.8 in. (148 mm) along the x-axis and 6 in. along the y-axis (150 mm), making it the perfect companion for woodworkers and metalworkers alike. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With five 1/2 in. mounting brackets positioned around the outside edge of the vise’s base, the WEN Cross Vise is compatible with the majority of drill press tables on the market (including the WEN 4210, 4212, 4214, 4225 and 4227 drill presses). And because it’s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

WEN Products 4.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise • Remember when you could make fine-tune adjustments with the simple turn of a wheel. The WEN 4.25-Inch Cross Vise provides stable support for your workpieces. Perfect for incremental drilling and other precision work. Attach it to your bench top, your drill press, your worktable and more. Made from heavy-duty powder-coated cast iron, the WEN Cross Vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 4.25 by 1.25 jaws open to 4.125 inches wide. Make minor adjustments along either axis with the onboard hand wheels. Each hand wheel features machined 0.1 mm increments, each full turn representing 3 mm of travel. The vise moves a full 5.8 inches (148 mm) along the x-axis and 6 inches along the y-axis (150 mm), making it the perfect companion for woodworkers and metalworkers alike. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With five 1/2-inch mounting brackets positioned around the outside edge of the vise’s base, the WEN Cross Vise is compatible with most drill press tables on the market. And because it’s a WEN product, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

Yost MFV-3 3" Multi-Function Vise • The Yost MFV-3 is a multi-function bench and drill press vise. This vise is designed to hold a variety of different products. The two side mounting slots allow the vise to be easily mounted to a drill press or to a work bench. Cast from high strength 30,000 PSI grey iron, this vise is designed for years of service. An Acme threaded main screw provides smooth operation. The precision machined main bar provides uniform closing. The vise features four removable clamping horns on the top that can grip angular, round, or asymmetrical parts with ease. The clamping horns can be removed and the metal anvil plate can be placed in the peg holes for quick access to an anvil. Additionally, the vise features horizontal and vertical V-Groove jaws for gripping various size tubes. 3” Jaw Width 3.75” Jaw Opening 1.75” Throat Depth .25” - 3” Pipe Jaw Capacity Expands to grip 6” diameter objects when utilizing the four clamping horns 3-1/8” Square Anvil Work Surface 4 Mounting Horns for gripping odd shaped work pieces

WEN Products Heavy Duty JT33 Keyless Drill Press Chuck with 1/64 to 5/8-Inch Capacity • Remember when you had the perfect chuck. Secure your bits with the WEN 5/8-Inch Keyless Drill Chuck. This reliable heat-treated steel drill chuck operates with less than 0.004 inches of runout (0.1 mm) for maximum drilling accuracy. Our JT33 arbor taper fits perfectly onto any JT33 drill press, lathe, or mill and can be installed with the simple tap of a rubber mallet. The 3-jaw-chuck opens and closes without the use of any keys or tools. The chuck is compatible with any 1/64 to 5/8 inch diameter drill bit. Our universal design fits onto a wide variety of drill presses, including WEN drill press models 4208, 4210, 4210T and 4212. Heavy duty heat-treated drill chuck operates with less than 0.004 inches of runout (0.1 mm) Holds drill bits anywhere from 1/64 to 5/8 inches in diameter Easily open and close the three chuck jaws without any tools or keys Universal design fits onto any drill press, milling machine, or CNC lathe with a JT33 spindle Compatible with WEN models 4208, 4210, 4210T and 4212 drill presses

WEN 5/8-Inch Keyless Drill Chuck with MT2 Arbor Taper, LA162L • Remember when you had the perfect chuck? Secure your bits with the WEN 5/8-Inch Keyless Drill Chuck. Our MT2 arbor taper fits perfectly into any MT2 drill press, lathe, or mill and can be installed with the simple tap of a rubber mallet. The 3-jaw-chuck opens and closes without the use of any keys or tools. The chuck is compatible with any drill bits and shafts up to 1/2 inch in diameter. This set was designed specifically for either the headstock or tailstock of the following WEN wood lathe models: 3424, 3424T, 3427, 34018, 34027, and 34034. It is also compatible with the WEN 4214 and 4225 Drill Presses. Holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter Easily open and close the three chuck jaws without any tools or keys Compatible with any MT2 drill press, lathe, or mill Installs easily with the simple tap of a rubber mallet Designed for use with WEN models 3424, 3424T, 3427, 34018, 34027, 34034, 4214, and 4225

WEN 12" Drill Press Clamp • 12 in. Drill Press Clamp Clamp boards up to 5 inches thick,Featuring a 3.5-inch throat,Tension adjustment knob changes the strength of the clamp s grasp,Fastens easily to drill press table slots with a quick release lever for simple disengagement,Compatible with any WEN drill press ten inches or larger

Yost Model 6D • Trust Yost to bring you excellent products every time. Yost Model 6D: Yost heavy duty drill press vise Model 6D, cast in 60,000 PSI gray iron, is a sturdy 6" vise recommended for drill press use The base includes three bolt lugs for versatility in mounting on a drill press table The steel adjusting screw has a coarse-pitch thread for fast action The fixed jaw is grooved vertically as well as horizontally for convenience in holding round pieces Jaws are replaceable hardened steel Overall dimensional specifications for the Model 6D drill press are as follows: 16-1/4" (Length), 9-1/4" (Width) and 3-1/2" (Height)